Thinklogical ImageEvolution X3 Manual Manual de usuario descargar pdf (Pagina 22)

Revision D 22 June 2011

MAIN MENU:

A: Set Input Select

Note:

A valid input must be applied in order for the configuration to be used.

a: Single Link Input 1

Selects the video and embedded audio source from BNC Input 1. This will select

the video signal to be processed from link 1. Note: This is also the default link

and does not have to be selected when configuring the output video format.

Signal does need to be present for configuration to be successful.

b: Single Link Input 2

Selects the video and embedded audio source from BNC Input 2.

c: Dual Link

Selects a Dual link Video and embedded audio source on BNC Inputs 1 and 2.

d: Dual Stream 3D

Inputs 1 & 2 are to be used for Left Eye / Right Eye signals for 3D processing for

output line-by-line, side-by-side, or rate-converted Dual Stream.

e: Enable Loop 1 Output

This will enable the video signal applied to input 1 to be looped back out of the

IEX3. This is enabled as default.

f: Disable Loop 1 Output

Turns off the BNC Loop output 1.

g: Enable Loop 2 Output

This will enable the video signal applied to input 2 to be looped back out of the

IEX3. This is enabled as default.

h: Disable Loop 2 Output

Turns off the BNC Loop output 2.

i: AUTO mode ON

Detects when a video source has changed format. On cable insertion, the unit

performs a re-configuration of the last known output setting with the new input.

j: AUTO Mode OFF

Turns off the AUTO mode.

j: Right Half Frame (3D to 2D)

This feature will scale the right half side of the input video and display it as full

screen.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 42 43

Sin comentarios

Thinklogical ImageEvolution X3 Manual Manual de usuario Pagina 22