Thinklogical Router - Configuring the ASCII Interface Manual de usuario

Busca en linea o descarga Manual de usuario para Sistemas De Videovigilancia Thinklogical Router - Configuring the ASCII Interface. Thinklogical Router - Configuring the ASCII Interface User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 9
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Revision: G
Configuring the ASCII Interface
Thinklogical, LLC
®
100 Washington Street
Milford, Connecticut 06460 U.S.A.
Telephone : 1-203-647-8700
Fax : 1-203-783-0049
www.thinklogical.com
Vista de pagina 0
1 2 3 4 5 6 7 8 9

Indice de contenidos

Pagina 1 - Revision: G

Revision: GConfiguring the ASCII InterfaceThinklogical, LLC ®100 Washington StreetMilford, Connecticut 06460 U.S.A.Telephone : 1-203-647-8700Fax : 1

Pagina 2 - vxrapi -v on the VxRouter

PrefaceThe router is controlled via an ASCII interface. This interface is accessible via a serial RS-232 port or over the network via a TCP port. Both

Pagina 3 - API Command Line Options

API Command Line OptionsEach model router has it's own API program. Examples are: vx40api, vx160api, mx48api and vx320api. The generic name that

Pagina 4 - Debugging Aids

Debugging AidsThe API program has several options that may aid in setup and debugging. These include logging the incoming ASCII commands, l

Pagina 5

Using putty to communicate to the APIWhen using putty (a Windows communication program) to communicate to a router, you must select 'Raw' m

Pagina 6 - A note for telnet users

Log le debugging entriesWhen debugging is turned on, several different types of messages are written to the system log file: /var/log/api. (Early sys

Pagina 7 - , vx160api.v35, vx 320api.v35

Using the Router ASCII Interface V3.5A modified version of API version 3, referred to as V3.5 now exists. It combines features of API V3 (automatic b

Pagina 8

Disabling Broadcast on Router Input PortsVersion 4.4 (and later) of the API will allow input ports to be restricted to just one output port at a time

Pagina 9 - Network Broadcast

Using Multicast to send Router Status instead of Network BroadcastVersion 4.5 (and later) of the API has a command line option to use a network multic

Comentarios a estos manuales

Sin comentarios