
1
2
3
4
+
5VDC
LINKPWR LOS
T R
HOST
+
5VDC
HOST
LINKPWR LOS
T
R
USB 2.0 PRINTER USB 2.0 DISK DRIVE USB 2.0 TABLET USB 2.0 CAMERA
QUICK START GUIDE
SOURCE CPU
STEP 1
Connect two multi-mode fiber optic cables (up to 1000 meters) between
the Receiver and Transmitter Units. Be sure to connect the TX port
labeled T to the RX port labeled R and the TX port labeled R to the
RX port labeled T. Do not kink or pinch the cable and be sure to keep
all bend radii to no less than 3 inches.
STEP 2
Connect the supplied AC Power Adapter (PWR-000022-R) to the
Receiver and plug it into a standard AC source.
STEP 3
Connect up to four USB 2.0 devices to the USB Extender Receiver’s
type-A ports at your destination location.
STEP 4
Connect the supplied AC Power Adapter (PWR-000022-R) to the
Transmitter and plug it into a standard AC source.
STEP 5
Using the supplied 6 ft. USB cable (CBL000015-006FR), connect the
USB-A connector to a USB port on the back of the source CPU and
the USB-B connector to the Transmitter’s type-B port. Ensure that
the computer is turned on and that all system functions are operating
properly.
3
2
1
4
5
When you receiver your Thinklogical™ USB
Extender 2.0 you should find the following
items:
· USB Extender Transmitter
· USB Extender Receiver
· AC Power Supply (PWR-000022-R) – Qty 2
· USB Cable, 6 ft. (CBL000015-006FR)
· Product Manual CD
Copyright © 2010. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
2.0
USB EXTENDER
USB 2.0 Hi-Speed Extension System
Model USB-2
The Future of Access and Control
PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
Visit us online at www.thinklogical.com for more product information, current updates and the complete line of Thinklogical™ products.
USB-A
USB-B
USB_Extender_2-0_Quick_Start_Rev_F
TRANSMITTER
RECEIVER
Comentarios a estos manuales