Thinklogical Remote Power Distribution Unit 4/4 Manual Manual de usuario descargar pdf (Pagina 13)

PDU 4/4 Product Manual September, 2014

Page 12

off – Turn a Port Off

The off command is used to turn off a port or group of ports.

PDU 4/4> help off

Syntax: off

Description: Turn an outlet or group of outlets off.

= (box # | all) <d> = disable <dly> = delay <e> = enable

<n> = name <t> = time = (port # | name | all)

Ports and Boxes may be referred to by all, name (implying a group) or number.

Ranges of ports may be specified as 1-4 = 1,2,3,4. All may also be used.

Any port may be referred to by either Port Numbers or Port Names. All ports with identical port names will be turned off

together (as a Port Group)

 The keyword “all” is a valid argument

Examples:

 Set Box 1, Ports 5 & 7 OFF off 1 5,7

 Set all boxes, ports 1 through 5, OFF off 0 1-5

 If Ports 1, 4 and 8 are named SUN in Box #2, then: off 2 SUN

set ports 1, 4 & 8 OFF in Box #2.

on – Turn a Port On

The on command is used to turn on a port or group of ports. If multiple ports are turned on in one command, the turn

on times are staggered by an “rbdelay” (reboot delay) value to each port.

PDU 4/4> help on

Syntax: on

Description: Turn an outlet or group of outlets on.

= (box # | all) <d> = disable <dly> = delay <e> = enable

<n> = name <t> = time = (port # | name | all)

Ports and Boxes may be referred to by all, name (implying a group) or number.

Ranges of ports may be specified as 1-4 = 1,2,3,4. All may also be used.

Any port may be referred to by either Port Numbers or Port Names. All ports with identical port names will be turned on

together (as a Port Group)

 The keyword “all” is a valid argument

Examples:

 Set Box 1, Ports 5 & 7 ON on 1 5,7

 Set all boxes, ports 1 through 5, ON on 0 1-5

 If Ports 1, 4 and 8 are named SUN in Box #2, then: on 2 SUN

sets ports 1, 4 & 8 ON in Box #2.

Note: In order to limit current surges, each port is turned on at “rbdelay” intervals. The first port in a

sequence will turn on immediately and the next will wait until its “rbdelay” has expired before turning

on, etc.

passwd - Change Password

The factory password of “pass” can be changed to any string of 1 to 16 characters (including all printable

characters), not including ‘space’ or ‘comma’, and the new password must not start with a number.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Comentarios a estos manuales

Sin comentarios

Thinklogical Remote Power Distribution Unit 4/4 Manual Manual de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas De Videovigilancia Thinklogical Remote Power Distribution Unit 4/4 Manual