Thinklogical Remote Power Distribution Unit 4/4 Manual Manual de usuario descargar pdf (Pagina 21)

PDU 4/4 Product Manual September, 2014

Page 20

Appendix A: PDU 4/4 Quick Start Guide

QUICK START

GUIDE

QUICK START

GUIDE

PDU 4/4

CPU or Terminal Device

To PDU 4/4 Units 3...16

Standard AC voltage OUT

(Unit 2 Bank 1)

PDU 4/4 Unit 1

PDU 4/4 Unit 2

Unit 1 Bank 1

Devices

Unit 2 Bank 1

Devices

Unit 2 Bank 2

Devices

Unit 1 Bank 2

Devices

Individual port status LEDs

Each PDU4/4 system includes the following

features:

 Eight individually-controlled AC power outlets

(available for both domestic and international)

 Dual 15 Amp (max) circuits, four outlets per

circuit

 Redundant DC power supplies for built-in I/O

and control circuits

 Individually programmable Reboot Time

Delay on each outlet

 Solid state zero-crossing relays to minimize

power spikes

 Easily expandable configuration

 Password Security

 User-definable Port Names and Port Groups

 Front panel display for easy system set up

and configuration

 Current monitoring of each port.

The PDU 4/4 is designed for desktop or 19"

rack mounting (1U).

Software updates available at

ftp.thinklogical.com

PDU_4-4_Domectic_manual_QSG

Domestic PDU 4/4 Configuration

Standard AC voltage OUT

(Unit 2 Bank 2)

Standard AC voltage OUT

(Unit 1 Bank 1)

Standard AC voltage OUT

(Unit 1 Bank 2)

Thinklogical’s® PDU 4/4 Power Distribution Unit is an AC Power Switch that remotely controls power to up to eight devices per unit.

The PDU 4/4 communicates with its control terminal using a serial interface and provides control to all devices with simple commands to turn power off or

on to reboot any one port, multiple ports, port groups or all devices.

 Power restarts can be sequenced using programmed time delays to minimize surge or allow drive spin-up time.

 Your configuration can be easily expanded with one serial cable for each PDU 4/4 unit added .

 A single serial interface integrates the control of all PDU 4/4s in your application.

 Up to sixteen PDU 4/4s can be cascaded together to control multiple systems from one common user interface.

 Each outlet individually switches up to 10 Amperes maximum with each bank rated at 15 Amperes total.

 Each PDU 4/4 utilizes two banks of four outlets and rear panel LEDs display the status of each port.

 The on command is used to turn on a port or group of ports. Any port may be referred to by either Port Numbers or Port Names. All ports with identical port names will be turned on together (as a Port Group).

 The off command is used to turn off a port or group of ports.

 The reboot output command is used to ‘reboot’ a server or device by cycling power to a port or ports. Refer to the user’s manual for further commands.

Once connected to the PDU 4/4’s CONTROL IN serial port, the following access and programming commands may be used:

Press ‘Enter’ on the keyboard to establish communication. Your display will show “Password:” The factory-set password is pass and may be changed by the System

Administrator. When Logged In, the command prompt will show “PDU 4/4>”. Commands are executed from the Serial Terminal.

1 2 ... 16 17 18 19 20 21

Comentarios a estos manuales

Sin comentarios

Thinklogical Remote Power Distribution Unit 4/4 Manual Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas De Videovigilancia Thinklogical Remote Power Distribution Unit 4/4 Manual